Xerox ColorQube 8900 - Basic Copying; Document Glass

Copying
88 ColorQube 8700/8900 Color Multifunction Printer
User Guide
Basic Copying
1. To clear previous settings, press the yellow Clear All button on the control panel.
2. Load your original documents:
 Use the document glass for single pages or paper that cannot be fed using the document
feeder. Place the first page of the document face down, in the top left corner of the document
glass.
 Use the document feeder for multiple or single pages. Remove any staples and paper clips from
the pages and place them face up in the document feeder.
3. Press the Services Home button, then touch Copy.
4. Use the alphanumeric keypad on the control panel to enter the number of copies. The number of
copies appears in the upper right corner of the touch screen.
Note: To correct the number of copies entered using the alphanumeric keypad, press the C button,
then re-enter the number.
5. Change the copy settings as needed. For details, see Selecting Copy Settings on page 90.
6. Press the green Start button.
Notes:
 To pause or cancel a copy job, press the red Stop button on the control panel.
 To interrupt a copy job, press the Interrupt button on the control panel.
 On the touch screen, touch Resume Scanning to continue the job, or Cancel Scanning to
cancel the job completely.
Document Glass
 Lift the document feeder
cover and place the first
page face down in the upper
left corner of the
document glass.
 The original must be aligned
to the matching paper size
printed on the edge of the
glass.
 The document glass
automatically detects
standard paper sizes.
 The document glass accepts
paper sizes up to 210 x
297 mm (8.3 x 11.7 in.).