Maintenance
ColorQube 8700/8900 Color Multifunction Printer 183
User Guide
Moving the Printer
This section includes:
Precautions for Moving the Printer ......................................................................................................................... 183
Moving the Printer Within the Office ..................................................................................................................... 184
Preparing the Printer for Shipment ......................................................................................................................... 186
Precautions for Moving the Printer
To avoid injuring yourself or damaging the printer, follow these guidelines:
WARNING: Parts of the printer are hot and need time to cool down before moving or packing the
printer. To avoid personal injury or printer damage, wait 30 minutes for the ink to solidify and the
printhead to cool down. The Power Off to Move procedure requires that you remove the cleaning unit
and waste tray.
CAUTIONS:
Keep the printer level. Tilting the printer can cause the ink to spill inside.
Always allow the printer to cool before it is moved to avoid ink spills that can damage
the printer.
Always turn off the printer using the power switch and wait for the power off sequence to finish.
Then unplug all cables and cords. Never turn off the printer by pulling the power cord or using a
power strip with a power switch.
For best results, use the Power Off to Move procedure on the printer control panel. For details, see
Moving the Printer Within the Office on page 184.
Always use at least two people to lift the printer.
When lifting the printer, grasp the areas as shown.
To Next Page
Loading...
