Xerox ColorQube 8900 - Installing the Software; Operating System Requirements; Installing Drivers and Utilities for Windows

Installation and Setup
ColorQube 8700/8900 Color Multifunction Printer 39
User Guide
Installing the Software
This section includes:
 Operating System Requirements ............................................................................................................................... 39
 Installing Drivers and Utilities for Windows .......................................................................................................... 39
 Installing Drivers and Utilities for Macintosh OS X Version 10.5 and Later .............................................. 40
 Installing Drivers and Utilities for UNIX and Linux ............................................................................................. 41
 Other Drivers ...................................................................................................................................................................... 42
Before installing driver software, verify that the printer is plugged in, turned on, connected correctly, and
has a valid IP address. The IP address usually appears in the upper left corner of the control panel.
If the Software and Documentation disc is not available, you can download the latest drivers for your
printer model:
 ColorQube 8700 Color Multifunction Printer: www.xerox.com/office/CQ8700drivers
 ColorQube 8900 Color Multifunction Printer: www.xerox.com/office/CQ8900drivers
Operating System Requirements
 Windows XP SP3 and later; Windows Server 2003 and later
 Macintosh OS X version 10.5 and later
 Novell Netware 5.0 and later
 UNIX and Linux: Your printer supports connection to various UNIX platforms through the
network interface.
Installing Drivers and Utilities for Windows
To access all the features of your printer, install the Xerox
®
print driver and the Xerox
®
scan driver.
To install the print and scan driver software:
1. Insert the Software and Documentation disc into the appropriate drive on your computer. The
installer starts automatically.
If the installer does not start automatically, navigate to the drive, and double-click the Setup.exe
installer file.
2. To change the language, click Language.
3. Select your language, then click OK.
4. Click Install Drivers > Install Print and Scan Drivers.
5. To accept the license agreement, click I Agree.
6. From the list of discovered printers, select your printer, then click Next.