Maintenance
170 ColorQube 8700/8900 Color Multifunction Printer
User Guide
4. Reinstall the pick roller assembly.
a. Hold the pick roller assembly vertically so that it aligns with the spaces into which it fits.
b. Gently snap the assembly into the slots. The assembly hangs down in the same position it was in
when you pulled it out of the printer in step 2d.
c. Gently swing the pick roller assembly up until clicks in place.
5. Reinstall the separator roller assembly. Squeeze in the two outer tabs and push the assembly straight
into the opening until both ends click in place.
6. Close the door.
To Next Page
Loading...
