Xerox Copycentre C118 User Manual

7 CentreWare Internet Services
112 Xerox CopyCentre/WorkCentre 118 User Guide
Protocol Settings SMTP Send Authentication – Select the check box to set
[POP before SMTP] for the authentication method. When
[POP before SMTP] is enabled, you must set [POP3 Server
Address], [POP User Name], and [POP User Password].
SMTP Server Address – Up to 256 characters can be
entered, including . (period) and - (hyphen).
HTTP
This page allows you to configure the HTTP protocol
settings.
Port Number – Enter the port number that receives requests
from the browser.
Maximum Sessions – Enter the maximum number of
sessions between 1 and 15.
Connection Time-Out – Specifies the time-out period when
transmission fails.
Emulation Settings Print Mode
This page allows you to specify the printer language to use
when a print job is sent using Parallel, USB, EtherTalk, SMB,
NetWare, LPD, IPP or Port9100. Only the enabled protocol
will be displayed.
Auto – Set the device so that it will automatically determine
and use the most suitable language to print data received
from the host device.
PostScript – Sets PostScript as the printer language.
PCL – Sets PCL as the printer language.
PJL – PJL is a command independent of printer languages.
Specify the printer language to use for the next job
regardless of the printer language that is currently being
used.
PostScript
This page allows you to configure the settings when
PostScript is enabled.
Logical Printer Number – This is a display-only item. It
displays the logical printer number that is being changed.
Click on the [Edit] button to configure.
• Paper Tray: Allows you to select the paper tray.
• Output Size: Allows you to select the paper size.
• Output Destination: Allows you to select the destination
for your output.
• Print Quantity Setup: Allows you to select the print
quantity setup that has priority over other settings.
• Quantity: Enter the number of sets to print when logical
printer settings is selected for print quantity setup.
• 2 Sided Print: Allows you to select double-sided printing.
• Collated: Allows you to specify whether to enable/disable
the Collated feature.
• Offset Stacking: Allows you to select the offset method.
• Image Enhancement: Allows you to specify whether to
enable/disable image enhancement.
Feature name Setting items

Xerox Copycentre C118 Specifications

General

Brand	Xerox
Model	Copycentre C118
Category	Copier
Language	English