Properties
Xerox CopyCentre/WorkCentre 118 User Guide 113
Emulation Settings PCL
This page allows you to configure the settings when PCL is
enabled.
Paper Tray – Allows you to select the paper tray.
Output Size – Allows you to select the paper size.
Paper Size (Bypass) – Allows you to select the paper size for
Tray 5 (bypass tray).
Quantity – Allows you to specify the number of sets to print
within the range of 1–999.
2 Sided Print – Allows you to select double-sided printing.
Image Orientation – Allows you to select the image
orientation.
Form Lines – Allows you to specify the page length (printing
area) of one page.
Font – Allows you to select the required font from the list of
fonts available.
Font Size – Allows you to specify the font size within the
range of 4.00–50.00 points in 0.25 point increments.
Font Pitch – Allows you to specify the font pitch within the
range of 6.00–24.00 points in 0.01 point increments.
Symbol Set – Allows you to select the required symbol set
from the list of symbol sets available.
Handle CR As – Allows you to enable or disable carriage
return and line feed for the PCL mode.
Handle LF and FF As – Allows you to enable or disable
carriage return and line feed, and also carriage return and
form feed, for the PCL mode.
HexDump – Allows you to enable/disable hexadecimal dump
for the PCL mode.
Image Enhancement – Allows you to enable/disable image
enhancement.
Feature name Setting items
To Next Page
Loading...
Need help?
General