Xerox Copycentre C118 User Manual

7 CentreWare Internet Services
114 Xerox CopyCentre/WorkCentre 118 User Guide
Memory Settings This page allows you to change the settings for the free
space available and the print page buffer size for Parallel,
USB, EtherTalk, SMB, NetWare, LPD, IPP, Port9100,
PostScript memory and PCL memory.
Parallel
Enter the print page buffer of the parallel interface within the
range of 64–1024 KB in 32 KB increments.
USB
Enter the print page buffer of the USB interface within the
range of 64 - 1024 KB in 32 KB increments.
EtherTalk
Enter the print page buffer of the EtherTalk interface within
the range of 64–1024 KB in 32 KB increments.
SMB
Allows you to select the spool destination for the job.
• Memory: Enter a value within the range of 512 KB–32 MB
(32768 KB) in 256 KB increments.
• Off: Enter a value within the range of 64–1024 KB in 32
KB increments.
NetWare
Enter the print page buffer of NetWare within the range of
64–1024 KB in 32 KB increments.
LPD
Allows you to select the spool destination for the job.
• Memory: Enter a value within the range of 512 KB–32 MB
(32768 KB) in 256 KB increments.
• Off: Enter a value within the range of 64–1024 KB in 32
KB increments.
IPP
Allows you to select the spool destination for the job.
• Off: Enter a value within the range of 64–1024 KB in 32
KB increments.
Port9100
Enter the print page buffer of the Port9100 interface within
the range of 64–1024 KB in 32 KB increments.
PostScript Memory
Enter the PostScript working memory within the range of
4608–98304 KB in 256 KB increments.
PCL Memory
Enter the PCL working memory within the range of 0–24576
KB in 256 KB increments.
Feature name Setting items

Xerox Copycentre C118 Specifications

General

Brand	Xerox
Model	Copycentre C118
Category	Copier
Language	English