Xerox VersaLink Series User Manual

Setting a Timeout and Synchronizing with a Time Server
1. To set a timeout for the Smart Card reader, in the Options area, locate Timeout.
2. For Timeout, type the number of seconds that the printer waits for a response from the domain
controller.
3. To synchronize the Smart Card reader with a time server:
• In the Options area, click SNTP.
• For Time Server Synchronization, click the Enable toggle button.
• For Time Server Address, type the IP address for the time server.
• For Time Synchronization Interval, type the number of hours when the Smart Card reader
synchronizes with the server.
• Click OK.
Configuring a Login Method
1. To configure a local login method, in the Device Website Login Method area:
• If Local is not currently selected, click Select.
• When Local is selected, click Edit.
• Select a method for users to identify themselves, then click OK.
2. If you are prompted to restart the printer, click Restart Later.
3. To configure a network login method, in the Device Website Login Method area:
• If Network is not currently selected, for Network, click Select.
• Select and configure an authentication protocol.
– For details on configuring the Kerberos (Windows ADS) protocol, refer to Configuring
Authentication Server Settings for Kerberos.
– For details on configuring the SMB (Windows ADS) protocol, refer to Configuring
Authentication Server Settings for SMB.
– For details on configuring the LDAP protocol, refer to Configuring Authentication Server
Settings for LDAP.
Completing the Smart Card Configuration
1. When finished, click OK.
2. If prompted to restart the printer, click Restart Now.
SSeettttiinngg PPaarraammeetteerrss ffoorr LLooggiinn,, LLooggoouutt,, aanndd PPaasssswwoorrdd
SSeettttiinngg LLooggiinn PPaarraammeetteerrss
You can adjust the settings for user logins from the printer control panel, including:
• Login name case-sensitivity
• Number of failed login attempts that are allowed
• If the login name appears on the user interface
74
Xerox
®
VersaLink
®
Series Multifunction and Single Function Printers
System Administrator Guide
Security

Xerox VersaLink Series Specifications

General

Brand	Xerox
Model	VersaLink Series
Category	Printer
Language	English