Xerox WorkCentre 3119 Service Manual

General Procedures and Information
6-30 06/06 WorkCentre 3119
tons to scroll between the options available. Press the enter button to confirm selection. Or, to re-
turn to standby mode, press Stop/Clear.
Paper Setting
This option allows the user to set the paper size and type used in the cassette tray or bypass. To
access this option, press the menu button until ’Special Copy’ appears on the display. Use the W
and Xbuttons to scroll between the options available. Press the enter button to confirm selection
or to scroll down another level. Or, to return to standby mode, press Stop/Clear.
Copy Setup
This option allows the change of default settings for ‘Darkness’, ‘Original Type’,’Reduce/En-
large’,‘No. of Copies’ and ‘Timeout’. To access this option, press the menu button until ’Special
Copy’ appears on the display. Use the W and Xbuttons to scroll between the options available.
Press the enter button to confirm selection or to scroll down another level. Or, to return to standby
mode, press Stop/Clear.
Report
This option prints out a system data report. To print out a report, press menu button until ‘System
Data’ appears on the display. Use the W and Xbuttons to scroll between ‘On’ and Off’. Press the
enter button to confirm selection. Or, to return to standby mode, press Stop/Clear.
Machine Setup
This option allows the change of language the machine will display. It also allows the configuration
of the power save and USB. To access this option, press the menu button until ’Machine Setup’
appears on the display. Use the W and Xbuttons to scroll between the options available. Press
the enter button to confirm selection or to scroll down another level. Or, to return to standby mode,
press Stop/Clear.
Maintenance
This option allows the user to clean the OPC drum, clear the printer settings and restores its fac-
tory default settings. To access this option, press the menu button until ’Maintenance’ appears on
the display. Use the W and Xbuttons to scroll between the options available. Press the enter but-
ton to confirm selection or to scroll down another level. Or, to return to standby mode, press Stop/
Clear.

Xerox WorkCentre 3119 Specifications

General

Print Technology	Laser
Print Speed	19 ppm
Print Resolution	600 x 600 dpi
Copy Speed	19 cpm
Copy Resolution	600 x 600 dpi
Paper Capacity	250 sheets
Connectivity	USB 2.0
Functions	Print, Copy, Scan
Scanner Type	Flatbed
Memory (Standard)	32 MB
Operating System Compatibility	Windows, Mac