General Procedures and Information
WorkCentre 3119 06/06 6-29
Settings
Reduce/Enlarge
This option allows the reduction or enlargement of a print. To access this option, press the menu
button until ’Reduce/Enlarge’ appears on the display. Use the W and Xbuttons to scroll between
the options available. Press the enter button to confirm selection. Or, to return to standby mode,
press Stop/Clear.
Darkness
This option adjusts the darkness of the print. To access this option, press the menu button until
’Darkness’ appears on the display. Use the W and Xbuttons to scroll between the options availa-
ble. Press the enter button to confirm selection. Or, to return to standby mode, press Stop/Clear.
Original Type
This option allows the user to select the type of copy being made. To access this option, press the
menu button until ’Original Type’ appears on the display. Use the W and Xbuttons to scroll be-
tween the options available. Press the enter button to confirm selection. Or, to return to standby
mode, press Stop/Clear.
Special Copy
This option allows the user to select different types of copying layouts. To access this option, press
the menu button until ’Special Copy’ appears on the display. Use the W and Xbuttons to scroll
between the options available. Press the enter button to confirm selection. Or, to return to standby
mode, press Stop/Clear.
Toner Save
This option allows the machine to reduce the amount of toner used on each page. To access this
option, press the menu button until ’Special Copy’ appears on the display. Use the W and Xbut-
9. Machine Setup
W X
Language [English/French/Spanish/Por-
tuguese/German/Italian/
Dutch/Russian/Polish/Hungar-
ian/Czech/Turkish/Swedish]-9
countries
English
Power Save On 5, 10, 15, 30, 45, 60 min 5 min
Off
USB Mode Fast, Slow Fast
10. Maintenance
W X
Clean drum
Clear settings Paper setting
Copy setup
All settings
Machine setup
Table 1:
1st Level 2nd Level 3rd Level 4th Level
Default
value
To Next Page
Loading...
Need help?
General
