Xerox WorkCentre 4150

January 2016
2-39
WorkCentre 4150/4250/4260WorkCentre WorkCentre 4150/4250/42604150/
05-920, 05-930
Status Indicator RAPs
• DADF PWB, PL 5.60.
• Document transport assembly, PL 5.60.
05-930 DADF Exit Door Open RAP
05-930 The machine has detected that the DADF exit door is open.
Procedure
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
(4150/4260) Refer to Wiring Diagram 11. Perform the following:
1. Raise the DADF input tray, PL 5.10 Item 5. Open the DADF exit assembly, PL 5.20 Item
26. Check that the DADF exit sensor actuator is not missing or damaged. Install new
components as necessary, PL 5.20.
2. Enter dC330 code 05-180. Check the DADF exit open sensor (Q05-180), PL 5.20 Item
16.
3. Check the wiring between the DADF exit open sensor and CN6 on the DADF Sensor
PWB. If necessary, install a new DADF exit open sensor, PL 5.20 Item 16.
4. Check the wiring between CN1 on the DADF Sensor PWB and CN3 on the DADF PWB.
5. If necessary, install new components:
• DADF PWB, PL 5.20 Item 6.
• DADF sensor PWB, PL 5.20 Item 4.
• Document transport assembly, PL 5.10 Item 2.
(4265) Refer to Wiring Diagram 45. Perform the following:
1. Raise the DADF input tray, PL 5.60 . Open the DADF exit assembly, PL TBD. Check that
the DADF exit sensor actuator is not missing or damaged. Install new components as
necessary, PL TBD..
2. Enter dC330 code 05-180. Check the DADF exit open sensor (Q05-180), PL TBD..
3. Check the wiring between the DADF exit open sensor and CN7 on the DADF PWB. If
necessary, install a new DADF exit open sensor, PL TBD.
4. If necessary, install new components:
• DADF PWB, PL 5.60.
• Document transport assembly, PL 5.60.