Xerox WorkCentre 4150

January 2016
4-124
WorkCentre WorkCentre 4150/4250/4260WorkCentre 4150/4250/42604150/
REP 7.7
Repairs and Adjustments
13. As necessary, remove the stack height sensor or paper empty sensor, Figure 4.
Figure 4 Sensors
Replacement
1. Replacement is the reverse of the removal procedure. To reinstall the tray feed assembly,
refer to Figure 5.
Figure 5 Reinstalling the feed assembly
Paper empty sensor.
Stack height sensor.
3
Hold the feed head.
4
Locate the drive shaft
through the hole in the
machine frame.
5
Reinstall the tray feed
assembly.
1
Put the harness through
the paper transport
assembly.
2
Reinstall the feed
head support spring.