Xerox WorkCentre 5020 User Manual

Replacing Consumables
Xerox WorkCentre 5016/5020 User Guide 113
4. Pull the Drum Cartridge out halfway.
Important • Do not touch the drum (blue roller)
when pulling out the Drum
Cartridge.
5. Take a new toner bottle out of the box.
6. Shake the toner bottle well about 15
times.
7. Position the toner bottle into the
opening on the Drum Cartridge, and
align the orange arrow of the toner
bottle with that of the Drum Cartridge.
8. Turn the toner bottle around in a
clockwise direction once, and align the
two orange arrows again.
9. Gently tap the toner bottle several
times to allow toner to be poured into
the Drum Cartridge.
Wait for 20 seconds, and tap it several
times to make sure that the toner bottle
has been emptied completely.
Important • Do not squeeze the toner bottle.
• Do not fill the Drum Cartridge with
more than a single bottle of toner at
a time.

Xerox WorkCentre 5020 Specifications

General

Print Technology	Laser
Print Speed	Up to 20 ppm
Print Resolution	Up to 600 x 600 dpi
Max Paper Size	A3
Standard Paper Capacity	250 sheets
Bypass Tray Capacity	100 sheets
Duplex Printing	Manual
Copy Speed	Up to 20 cpm
First Page Out Time (Copying)	Less than 10 seconds
Scan Resolution	Up to 600 x 600 dpi
Operating System Compatibility	Windows, Mac OS
Automatic Document Feeder	50 sheets
Connectivity	USB 2.0
Functions	Print, Copy
Reduction / Enlargement	25% - 400%
Scan Destinations	USB, Email
Fax Transmission Speed	33.6 kbps
First Page Out Time (Printing)	Less than 8 seconds