Xerox WorkCentre 5020

Account Mode Overview
Xerox WorkCentre 5016/5020 User Guide 66
1. Press the <Log In/Out> button for four
seconds.
The machine enters the System Setting
Mode.
The letter [P] appears blinking in the
Display.
2. Enter "70" using the numeric keypad.
Note • The system setting menu number
for selecting an account mode is
"70".
For information on the system settings, refer to
"System Settings" (P.123).
3. Press the <Start> button to confirm the
entered menu number.
The currently-set value appears
blinking in the Display.
<Log In/Out>
button
Numeric keys
<Start> button