Xerox WorkCentre 5020

Multiple Account Mode
Xerox WorkCentre 5016/5020 User Guide 72
4. Press the <Start> button to confirm the
entered password.
If the entered password is correct, the
machine enters the Copy Mode, and [1]
appears in the Display.
5. Hold down the <Log In/Out> button for
four seconds.
The machine enters the System Setting
Mode.
The letter [P] appears blinking in the
Display.
6. Enter the menu number using the numeric keypad.
Menu
Number
Description
200 Specify a three-digit password of the System Administrator within a range of 000 -
999. (Default: 111)
201 Specify a three-digit password of the account number 1 within a range of 000 - 999.
202 Specify a three-digit password of the account number 2 within a range of 000 - 999.
203 Specify a three-digit password of the account number 3 within a range of 000 - 999.
204 Specify a three-digit password of the account number 4 within a range of 000 - 999.
205 Specify a three-digit password of the account number 5 within a range of 000 - 999.
206 Specify a three-digit password of the account number 6 within a range of 000 - 999.
207 Specify a three-digit password of the account number 7 within a range of 000 - 999.
208 Specify a three-digit password of the account number 8 within a range of 000 - 999.
209 Specify a three-digit password of the account number 9 within a range of 000 - 999.
210 Specify a three-digit password of the account number 10 within a range of 000 -
999.
<Start> button
<Log In/Out>
button