03/02 8.8 Stapler Finisher
WorkCentre Pro 423/428 8-19 CHAPTER 8 ACCESSORIES
6. Install the Base Frame and secure it with the screws (L)(2) enclosed.(Figure-5)
1) Engage the hooks of the rack with the square holes (2) of the main unit.
2) Tighten the screws (L)(2).
(Figure-5) j0hn8068
7. Install the Rail Cover. (Figure-6)
1) Slide the Rail Cover to install.
(Figure-6) j0hn8070
8. Install the Rear Stay Cover. (Figure-7)
1) Install the Rear Stay Cover.
(Figure-7) j0hn8071
9. Install the Finisher. (Figure-8)
1) Mount the Finisher by aligning the bottom Studs (4) with the Base Frame holes.
2) Secure the Finisher with the Screw (S) enclosed.
(Figure-8) j0hn8072
To Next Page
Loading...
