Xinje XD5 - Counter ( C, HC )

43
X0
Y0
X0
X0
Y0 T2
T2
TMR T2 K200 K10
Y0
X0 is ON, output Y0. X0 changes from ON to OFF, delay 2s then cut off Y0.
X0
T1
T2
X0
Y0
T1 T2 T1
Y0
TMR T1 K20 K10
TMR T2 K10 K10
X0 is ON, Y0 begin to twinkle. T1 is Y0-OFF time; T2 is Y0-ON time.
Note: The range of soft components mentioned above is the valid range of PLC in the X-NET
communication mode. In the MODBUS communication mode, some relays can not read and
write. The specific usable range is shown in chapter 6-2-3.
2-8．Counter ( C, HC )
The counter addresses of XD/XL series PLC are in decimal; please see the following table for
details:
Series
Name
Range
Normal
Power-off holding
High speed counter
XD1
C
HC
HSC
C0~C575
HC0~HC95
HSC0~HSC31
XD2
C0~C575
HC0~HC95
HSC0~HSC31
XD3
C0~C575
HC0~HC95
HSC0~HSC31
XD5
C0~C4999
HC0~HC1999
HSC0~HSC39
XDM
C0~C4999
HC0~HC1999
HSC0~HSC39
XDC
C0~C4999
HC0~HC1999
HSC0~HSC39
XD5E
C0~C4999
HC0~HC1999
HSC0~HSC39
XDME
C0~C4999
HC0~HC1999
HSC0~HSC39
XDH
C0~C19999
HC0~HC1999
HSC0~HSC39
Number list
Application
Output delay
Twinkle