Xinje XD5 - [Ld], [Ldi], [Out]; Mnemonic and Function; Statement

61
ALT
The status of the
assigned device is
inverted on every
operation of the
instruction
M0ALT
3-10
TMR
Non-power-off holding
timer
TMR T0 K10 K100
3-14
TMR_A
Power-off holding timer
TMR_A HT0 K10 K100
3-14
END
Force the current
program scan to end
3-15
GROUP
Group
3-15
GROUPE
Group End
3-16
3-2. [LD] , [LDI] , [OUT]
Mnemonic
Function
Format and Operands
LD
(positive)
Initial logic operation
contact type NO
(Normally Open)
M0
Operands:
X,Y,M,HM,SM,S,HS,T,HT,C,HC,Dn.m
LDI
(negative)
Initial logic operation
contact type NC
(Normally Closed)
M0
Devices:
X,Y,M,HM,SM,S,HS,T,HT,C,HC,Dn.m
OUT
(OUT)
Final logic operation type
drive coil
Y0
Operands:
X,Y,M,HM,SM,S,HS,T,HT,C,HC,Dn.m
 Connect the LD and LDI instructions directly to the left bus bar. It can work with ANB and
be used at the branch start.
 OUT instruction can drive the output relays, auxiliary relays, status, timers, and counters.
Mnemonic and Function
Statement
END
GROUP
GROUPE