103
• Reguest a password initialization to administrator. Administrator click user ID at [Settings] – [Privileges] – [User]
page. Initialize user’s password. New password will be set as same as ID.
Forgot password? : Administrator
• Click ‘Password initialization’ menu at the lower of password field. Enter installation key and click ‘Clear’
button. New password will be set as same as ID.
Want to know the firmware version.
• Access to e-TRAYz Home page. Firmware version is displayed at the top of screen. (ex. Ver.1.0.0)
• You can also see the version at [Settings] – [System] – [Upgrade] page too.
Can not the USB copy.
• Verify that USB disk has been correctly connected. Port for Copy function is the lower port of copy button.
• Make sure that e-TRAyz have enough capacity for USB copy.
Where is USB device connected e-TRAYz?
• The connected USB device is in the External Disk as USB1 and USB2.
Can not upload data to USB devices.
• Make sure that USB device have enough capacity.
• If a file system of USB device is NTFS, it is possible to upload or edit files to USB devie. Please use the USB
device after formatted as FAT32 or XFS.
Want to upgrade Software.
• Move to [Settings] – [System] – [Upgrade] page. You can see all the firmware files. Upgrade firmware refer to
[Settings] – [Firmware upgrade] menu of this manual.
Want to Shutdown system.
• Move to [Settings] – [System] – [Power] page. Choose ‘ShutDown’ and click ‘OK’ button.
• If you cannot access to ‘Settings’, Turn off the Power switch of device.
Can Mac or Linux users use it too?
• Mac or Linux users can use all of the Xtreamer e-TRAYz function except ‘e-TRAYz’ using e-TRAYz connector.
To Next Page
Loading...