19
Router
Router setup is used to grant internet users access to an e-TRAYz on your network.
※ This step can be skipped if you are not connected to the Internet via a router.
※ Not all routers provide these functions. Different router models may use different terminology. For more
detailed information, refer to the router’s manual.
UPnP Port Mapping
UPnP port mapping can be used to access devices on your LAN from the Internet.
Devices on the LAN are identified by a port number. Your router has to support
UPnP Port mapping in order to use this function
DMZ
DMZ can be used to access a single device on your LAN from the Internet. If DMZ
option is used then only e-TRAYz can be accessed.
Port Forwarding
(Virtual Server)
Port Forwarding can be used to access devices on your LAN from the Internet.
Devices on the LAN are identified by a port number.
※ We recommend to use DMZ because it is simpler to setup than Port Forwarding.
※ If you are using both DMZ and Port Forwarding simultaneously, Port Forwarding will be applied prior to
DMZ.
To Next Page
Loading...