Xtreamer e-TRAYz - Router Setup Using Upnp

39
Router Setup using UPnP
When you use router, you need to setup router to access e-TRAYz via the internet. When you use the router’s
UPnP function, port can be simply set without complex setup such as DMZ or Port forwarding. * This case is
only available if you use a router which supported UPnP function.
Move to [Settings] – [Service] – [UPnP] page.
A. Activate UPnP function of the IP router. (Refer to router’s guide)
B. Activate Router port matting using UPnP of Xtreamer e-TRAYz. Check Activate router port mapping
function using UPnP and click Change Setup button.
C. Apply the port mapping by using UPnP.