Xtreamer e-TRAYz - Page 32

32
3. Check current RAID mo
de and Disk
capacity.
Click OK
button, the configuration
changing will be started.
2) Add a disk to RAID : Linear -> RAID 1 or RAID 1 -> Linear
If you want to change RAID mode after adding a disk, first of all, add disk to current RAID configuration,
then change the RAID mode.
1. Click Configuration Change button and
move to Setup wizard to change disk
configuration. Click Configuration
Change button on the bottom of page.
2. Choose Adding a New HardDisk (not
change RAID mode) and click Next
button.
* If possible, the same amount of disks
should be used for RAID 1 mode. And if
you cannot, insert larger disk to HDD B.