SonTek RS5 User Manual (August 2020) 63
(support@sontek.com) before using this option. This can be done through the Repair
Device Without Firmware feature from the Connect dialog, highlighted in Figure 35.
Figure 35. Repair Device Without Firm w are
The Repair Device Without Firmware dialog (Figure 36) will prompt the user for the
instrument serial number and the firmware file the user wishes to use. Please select the
appropriate file and click OK.
Figure 36. Repair Device Without Firm w are Dialog
The software will prompt the user to power cycle the RS5 system. Be sure to click
Continue before powering on the system.
Figure 37. Repair Device Without Firm w are Prompt to Pow er Cycle
The new firmware will then be loaded onto the system.
To Next Page
Loading...
