SonTek RS5 User Manual (August 2020) 73
Figure 50. System Configuration
A dialog will pop up allowing the user to enter various configuration parameters (see
Figure 51). These items must be entered with care, as they directly affect the final
discharge calculations.
Figure 51. System Configuration Dialog
If the System Configuration section has not been completed, a red X will remain visible
in that section. The Transducer Depth and Magnetic Declination fields are highlighted in
red if not completed – if they are not completed, the user will receive multiple QA/QC
warnings associated with these values. If values are not known before beginning the
measurement, they can be entered as “0” as long as the user is aware that their
To Next Page
Loading...
