2.2 b: Application
YASKAWA ELECTRIC TOEP C710687 03B FSDrive-MV1000 Parameter Guide 117
Differential Feedback
The second PID feedback signal for differential feedback can come from the sources listed in Table 2.11. The differential
feedback function is automatically enabled when a differential feedback input is assigned.
Table 2.11 PID Differential Feedback Sources
Note: A duplicate allocation of the PID differential feedback input will result in an oPE alarm.
PID Differential Feedback Source Setting
Analog input 1 Set H3-02 = 16
Analog input 2 Set H3-10 = 16
MV1000ParameterGuide_E_conditional.book 117 ページ ２０１３年１０月１１日 金曜日 午後８時１８分
To Next Page
Loading...
