YASKAWA FSDrive-MV1000 - Storing Drives

1.3 Parameter Table
50 YASKAWA ELECTRIC TOEP C710687 03B FSDrive-MV1000 Parameter Guide
H1-12
(409H)
Contact Input 12
Function Selection
Assigns a function to the contact inputs.
Refer to H1 Contact Input Selections on page 51 for a description of setting
values.
Note: Unused terminals should be set to F.
Default: F
Min: 0
Max: 9F
171
H1-13
(303FH)
Contact Input 13
Function Selection
Assigns a function to the contact inputs.
Refer to H1 Contact Input Selections on page 51 for a description of setting
values.
Note: Unused terminals should be set to F.
Default: F
Min: 0
Max: 9F
171
H1-14
(3040H)
Contact Input 14
Function Selection
Assigns a function to the contact inputs.
Refer to H1 Contact Input Selections on page 51 for a description of setting
values.
Note: Unused terminals should be set to F.
Default: F
Min: 0
Max: 9F
171
H1-15
(3041H)
Contact Input 15
Function Selection
Assigns a function to the contact inputs.
Refer to H1 Contact Input Selections on page 51 for a description of setting
values.
Note: Unused terminals should be set to F.
Default: F
Min: 0
Max: 9F
171
H1-16
(3042H)
Contact Input 16
Function Selection
Assigns a function to the contact inputs.
Refer to H1 Contact Input Selections on page 51 for a description of setting
values.
Note: Unused terminals should be set to F.
Default: F
Min: 0
Max: 9F
171
<43> The default setting is set to 73 and cannot be changed under the following conditions.
y The drive software version is S0108 and later.
y o2-09 is set to 2.
No.
(Addr.)
Name Description Setting Page
All Modes
common_
All Modes
common_
All Modes
common_
All Modes
common_
All Modes
common_
MV1000ParameterGuide_E_conditional.book 50 ページ ２０１３年１０月１１日 金曜日 午後８時１８分