5.11 S: Special Applications
380 YASKAWA SIEPYAIH6B01A HV600 AC Drive Bypass Technical Reference
Table 5.57 Sequence Timer Home Screen Text
Status Monitor Display Description
You set the Sequence Timers to operate the drive, but there is no Run command.
You set the Sequence timers to operate the drive and applied the Run command, but the timer did not start.
You set the Sequence timers to operate the drive, applied the Run command, and the timer started to operate the
drive.
The message text shows the active timer number.
■ S2-01: Timer 1 Start Time
No.
(Hex.)
Name Description
Default
(Range)
S2-01
(3206)
Timer 1 Start Time Sets the start time for timer 1. 12:00
(12:00 AM - 11:59 PM)
Note:
• Default is when o4-22 = 1 [Time Format = 12 Hour Clock]. When o4-22 = 0 [24 Hour Clock], default is 00:00. When o4-22 = 2 [12 Hour
JP Clock], default is 00:00 AM.
• Range is when o4-22 = 1. When o4-22 = 0, range is 00:00 to 24:00. When o4-22 = 2, range is 00:00 AM to 11:59 PM.
■ S2-02: Timer 1 Stop Time
No.
(Hex.)
Name Description
Default
(Range)
S2-02
(3207)
Timer 1 Stop Time Sets the stop time for timer 1. 12:00
(12:00 AM - 11:59 PM)
Note:
• Default is when o4-22 = 1 [Time Format = 12 Hour Clock]. When o4-22 = 0 [24 Hour Clock], default is 00:00. When o4-22 = 2 [12 Hour
JP Clock], default is 00:00 AM.
• Range is when o4-22 = 1. When o4-22 = 0, range is 00:00 to 24:00. When o4-22 = 2, range is 00:00 AM to 11:59 PM.
■ S2-03: Timer 1 Day Selection
No.
(Hex.)
Name Description
Default
(Range)
S2-03
(3208)
Timer 1 Day Selection Sets the days for which sequence timer 1 is active. 0
(0 - 10)
0 : Timer Disabled
1 : Daily
2 : Mon - Fri
3 : Sat - Sun
4 : Monday
To Next Page
Loading...
