8.4 Replace Drive Cooling Fans and Circulation Fans
582 YASKAWA SIEPYAIH6B01A HV600 AC Drive Bypass Technical Reference
3. Put the cables and connectors in the recess of the drive.
A - Front of drive B - Recess for the cable and connector
*1
Figure 8.50 Put the Cables and Connectors in the Drive Recess
*1 Make sure that the cable and connector are in the correct space.
4. Hold the fan finger guard at an angle and put the connector tabs on the fan finger guard into the receiving
areas on the drive.
Note:
When you install the cooling fan, make sure that you do not pinch cables between the fan finger guard and the drive.
A - Front of drive
B - Receiving area
C - Tab
Figure 8.51 Install the Fan Finger Guard
To Next Page
Loading...
