YASKAWA HV600 User Manual

Network Communications
10
10.2 Fieldbus Network Support
YASKAWA SIEPYAIH6B01A HV600 AC Drive Bypass Technical Reference 697
10.2 Fieldbus Network Support
You can use a PLC or building automation controller to control and monitor the bypass through the network. The
bypass has a standard RS-485 interface (serial communications). Install a separately sold communication option on
the bypass to support other network communications.
◆ Available Communication Options
Refer to Table 10.1 for the fieldbus networks that are compatible with the bypass. Contact Yaskawa or your nearest
sales representative to order a communication option.
Table 10.1 Available Fieldbus Network
Type of Communications Option Models
LonWorks SI-W3
Modbus TCP/IP SI-EM3
PROFINET SI-EP3
Type of Communications Option Models
EtherNet/IP SI-EN3
Dual port Modbus TCP/IP SI-EM3D
Dual port EtherNet/IP SI-EN3D

YASKAWA HV600 Specifications

General

Category	DC Drives
Series	HV600
Overload Capacity	150% for 60 seconds
Output Voltage	0 - Input Voltage
Enclosure	NEMA 1, NEMA 12
Communication	Ethernet/IP, Modbus, DeviceNet, Profibus
Safety	Safe Torque Off (STO)
Protection Features	Overcurrent, Overvoltage, Undervoltage, Short Circuit
Humidity	5-95% (non-condensing)
Altitude	Up to 1000m (3280ft) without derating
Control Method	Vector Control