YASKAWA HV600 User Manual

11.2 UL Standards
772 YASKAWA SIEPYAIH6B01A HV600 AC Drive Bypass Technical Reference
11.2 UL Standards
Figure 11.1 UL/cUL Mark
The UL/cUL Mark identifies that this product conforms to rigid safety standards. This mark appears on products in
the United States and Canada. It shows UL approval, which identifies that the product complies with safety standards
after careful inspection and assessment. You must use UL Listed or UL Recognized parts for all primary components
that are built into electrical equipment that has UL approval.
This product has been tested in accordance with UL standard UL508A, and has been verified to be in compliance with
UL standards.
Machines and devices integrated with this product must satisfy the following conditions for compliance with UL
standards.
◆ Area of Use
Install this product in a location with Overvoltage Category III and pollution degree 2 or less.
■ Ambient Temperature Setting
Maintain the ambient temperature within the following ranges according to the enclosure type.
• IP20/UL Type 1: -10 °C to +40 °C (14 °F to 104 °F)

YASKAWA HV600 Specifications

General

Category	DC Drives
Series	HV600
Overload Capacity	150% for 60 seconds
Output Voltage	0 - Input Voltage
Enclosure	NEMA 1, NEMA 12
Communication	Ethernet/IP, Modbus, DeviceNet, Profibus
Safety	Safe Torque Off (STO)
Protection Features	Overcurrent, Overvoltage, Undervoltage, Short Circuit
Humidity	5-95% (non-condensing)
Altitude	Up to 1000m (3280ft) without derating
Control Method	Vector Control