100
4.8 Web-Based Management - WBM
2. Enable or Disable Syslog Configuration
1. By selecting or deselecting the control field of [Syslog Server Destination Activation] at
[Syslog Configuration] you can enable respectively disable the Syslog server targets
specified in the table.
2. Click on [Apply].
The settings are accepted.
(5) User Authentication
• At [User Authentication] you can enable or disable user authentication.
• If user authentication is enabled, you have access to definable components of the CPU and functions in iCube
Engineer exclusively by specifying user name and password.
• If user authentication is disabled, access takes place without a user query. The areas for the administrator
remain password-protected.
• By default user authentication is enabled. On delivery, the "admin" user is already created with administrator rights.
• Please note that by disabling the user authentication you endanger the security of your system against unauthorized
access!
• Use the administrator password printed on the CPU only for the initial login to the WBM.
• After you have successfully logged in, you should change the administrator password for security reasons.
To Next Page
Loading...
