74
4.8 Web-Based Management - WBM
4.8.2 Overview
(1) General Data
Here you will find general details about the CPU, e.g. hardware and firmware versions, order number as well as
vendor information.
(2) Cockpit Cockpit
Here you will find the Cockpit toolbar and information about the time, status and utilization of the CPU.
1. Cockpit Toolbar
The toolbar provides access to the following functions:
• : Stop - Stops program execution on the CPU.
• : Hot Start - Performs a hot start. The CPU is restarted and the program continues without initializing the
variables.
• : Warm Boot - Performs a warm boot. The CPU is restarted and the program continues with initializing the
variables. The values of the variables marked with “Retain” in iCube Engineer are retained.
To Next Page
Loading...
