75
4.8 Web-Based Management - WBM
• Cold Start - Performs a cold start. CPU is restarted and the program continues with initializing all the variables.
• : Memory download - Saves the retain data locally in a file.
• : Memory upload - Restores the saved retain data.
• : Reboot - Performs a reboot. The operation corresponds to a power off/on process. The loaded application (code
and network configuration) is deleted from the RAM. The controller restarts with the last saved settings and, if
available, loads the boot project from the flash memory.
• : Reset - Resets the CPU to factory settings. Similar to the [Restart] command, the loaded application (code
and network configuration) is deleted from the RAM but also from the flash memory (boot project). Additionally,
all communication settings are reset to default settings.
• : Change Password - This allows you to change the password of the current user account for online access to
the CPU.
:
2.Date and Time
The current system time is shown via Current time stamp. System uptime shows the current runtime since PowerON.
Date and time are set via
4.8.4(
2
)
Date and Time on page 86.
3.Utinization
CPU memory utilization and the CPU load are shown here.
4.PLC Runtime
The CPU status and memory usage in the PLC runtime system are shown here.
4.8.3 Diagnostics
(1) Axis Grid
Here you will find basic information about configuring your axes such as servo drives.
4
Deployment
To Next Page
Loading...
