73
4.8 Web-Based Management - WBM
1. After logging into the WBM, you can view or respectively adjust the contents of the
automatically generated certificate via [Configuration] - [Web Services] and re-generate it
with [Re-generate HTTPS certificate] .
As soon as you change one of the IP addresses of the CPU, you must regenerate the certificate via [Re-gener- ate
HTTPS certificate].
2. Navigate to the certificates via [Security] - [Certificate Authentication].
3. Switch to the tab Identity Store.
Here you have access to the generated certificate.
4. Load the requested HTTPS certificate onto your PC with . Here you can also
transfer your own existing HTTPS certificate to the CPU.
5. Install the certificate according to your Windows system as a trusted root certification
authority.
After installation, communication between the PC and CPU takes place as a [secure connection].
(3) Structural Design
The WBM is divided into the following areas:
Language switching between [German] and [English].
Front view of the CPU with type and order designation.
Menu column for navigation.
Area for information output and input dialogs
Shows the current hardware/firmware version and MAC address of the CPU.
Access to the Yaskawa software license conditions (Software License Terms - SLT) and the license information for the individual
CAUTION
If the communication between PC and CPU is declared as an [insecure connection] during
operation, either the certificate has changed, e.g. due to an IP address change, or your sys-
tem has been compromised by third parties! Always make sure that either the current certifi-
cate of the CPU or, if available, an associated higher-level certificate is installed on the PC!
Linux
acka
es.
1
2
3
4
5
6
4
Deployment
To Next Page
Loading...
