8
1.1 Copyright © YASKAWA Electric Corporation
1.1.1 All Rights Reserved
This document contains proprietary information of Yaskawa and is not to be disclosed or used except in accord-
ance with applicable agreements.
This material is protected by copyright laws. It may not be reproduced, distributed, or altered in any fashion by
any entity (either internal or external to Yaskawa) except in accordance with applicable agreements, contracts or
licensing, without the express written consent of Yaskawa and the business management owner of the material.
For permission to reproduce or distribute, please contact your nearest Yaskawa representative or one of the offi-
ces listed on the back of this manual.
1.1.2 EC Conformity Declaration
Hereby, YASKAWA Electric Corporation declares that the products and systems are in compliance with the
essential requirements and other relevant provisions. Conformity is indicated by the CE marking affixed to the
product.
1.1.3 Conformity Information
For more information regarding CE marking and Declaration of Conformity (DoC), please contact your local
representative of YASKAWA Electric Corporation.
1.1.4 Trademarks
SLIO is a registered trademark of YASKAWA Europe GmbH.
All Microsoft Windows, Office and Server products mentioned are registered trademarks of Microsoft Inc.,
USA.
Linux is a registered trademark of Linus Torvalds.
PLCnext Technology is a registered trademark of Phoenix Contact.
EtherCAT® is a registered trademark and patented technology, licensed by
Beckhoff Automation GmbH, Germany.
PROFINET is a registered trademark of PROFIBUS and PROFINET International (PI).
QR code is a registered trademark of Denso Wave Inc.
Ethernet is a registered trademark of the Xerox Corporation.
All other trademarks, logos and service or product marks specified herein are owned by their respective
companies.
1.1.5 General Terms of Use
Every effort has been made to ensure that the information contained in this document was complete and accurate
at the time of publishing. We cannot guarantee that the information is free of errors, and we reserve the right to
change the information at any time. There is no obligation to inform the customer about any changes. The cus-
tomer is requested to actively keep his documents up to date. The customer is always responsible for the deploy-
ment of the products with the associated documentation, taking into account the applicable directives and
standards.
1.1
Cop
ri
ht
ASKAWA Electric Corporation
To Next Page
Loading...
