15
1.5 Safety Precautions
(3) Installation Precautions
NOTICE
Never install the product in an atmosphere containing halogen (fluorine, chlorine, bromine,
or iodine).
There is a risk of malfunction or damage.
Always mount the product in the specified orientation.
There is a risk of malfunction.
Do not subject the product to strong shock.
There is a risk of malfunction.
Do not touch the electrodes when installing the battery.
Static electricity may damage the internal electronic component.
Do not install the product in any of the following locations.
• Locations that are subject to direct sunlight
• Locations that are subject to ambient operating temperatures that exceed product
specifications
• Locations that are subject to relative humidities that exceed product specifications
• Locations that are subject to condensation as the result of extreme changes in
temperature
• Locations that are subject to corrosive or flammable gases
• Locations that are near flammable objects
• Locations that are subject to dust, salts, or metal powder
• Locations that are subject to water, oil, or chemicals
• Locations that are subject to vibration or shock that exceeds product specifications
• Locations near devices that generate strong magnetic fields
• Locations that are subject to radioactivity
If you install the product in any of the above locations, the product may fail or be damaged.
(4) Wiring Precautions
CAUTION
Do not step on the product or place heavy objects on the product.
There is a risk of injury or malfunction.
Do not block the air ports on the product. Do not allow foreign objects to enter the product.
There is a risk of internal element deterioration, malfunction, or fire.
Leave the specified amount of space between the product, and the interior surface of the
control panel and other devices.
There is a risk of fire or malfunction.
WARNING
Check the wiring to be sure it has been performed correctly.
There is a risk of motor run-away, injury, or malfunction.
1
Preface and General Precautions
To Next Page
Loading...
