85
4.8 Web-Based Management - WBM
4.8.4 Configuration
(1) Network
1. User with Read Permission
Here you can view the Ethernet settings of your CPU. You only have read access.
2. User with Write Permission
If you are logged in with administrator rights, you can view the Ethernet settings of your CPU here. You
can also change the current network settings in the [Configuration] column.
To change the network settings, proceed as follows:
1. Enter your new settings in the [Configuration] column.
2. Click on [Apply and Reboot].
The settings are adopted, transferred to the CPU and the CPU is automatically restarted for activation.
You can also configure the network settings via iCube Engineer. For more details, please refer to the
corresponding online help.
4
Deployment
To Next Page
Loading...
