64
4.3 Commissioaing
4.3.1 Install iCube Engineer
(1) Installation
The software iCube Engineer is required for commissioning the CPU.
1. Download the software iCube Engineer to your PC. You can find this at
https://www.icubecontrol.com/icube-engineer.html
Unzip the file in your working directory and start the installation by double-clicking on
the exe file.
2. Follow the instructions of the installation wizard.
The installation is started.
3. When prompted, restart your system.
The installation is finished. You can start iCube Engineer now. This will run for 30
days without a license.
4.3.2 Online Access to the CPU
(1) IP Address Parameters for Communication
On delivery the following IP address parameters for the communication are preset in the project template of the
CPU:
• Ethernet-Port (X3/X4): 192.168.1.1
• Subnet mask: 255.255.255.0
• Gateway: -
If your CPU has different IP address parameters, you can adapt them for iCube Engineer.
4.3 Commissionin
To Next Page
Loading...
