4
125
5.1 Appearance and Parts Description
5.1.4 Switches
The iC9226M has the following three switches.
• Operating mode switch: S3
• DIP switch: S1, S2
• Pushbutton switch: S4
(1) Operating Mode Switch: S3
This switch primarily sets the operating mode of the iC9226M.
• With the operating mode switch, you can select between the oper-
ating modes ST (STOP) and RN (RUN) on the CPU.
• With the button position MR (Memory Reset) you can request a
reset of the CPU in different levels. [INSERT LINK]Chap. 4.6
‘MRESET and reset to factory settings’ page 71
Switch Posi-
tion: Name
Operating Mode
Default
Description
Top: RN CPU RUN
RN (RUN)
Middle: ST CPU STOP
Bottom: MR
Clear Memory (Clear normal
memory and reset to factory
default condition)
(2) DIP Switch: S1, S2
This switch primarily sets the operating mode of the iC92226M.
The operating mode is judged from the status of the switches when the power is turned ON.
5
Appearance and Parts
To Next Page
Loading...
