105
4.8 Web-Based Management - WBM
4.8.6 Administration
(1) iCube Apps
1. Enable/Disable User Authentication
Here you can install and uninstall apps. After successful installation, you can also start and stop the apps
from
here. iCube Apps are software applications ranging from libraries to complete programmes
provided to you by Yaskawa.
All installed apps are listed in the table with additional app-specific information.
• App Name
– Name of the App.
• App ID
– Unique identifier of the app.
• Version
– Version of the app
• Min FW Version
– Firmware version of the CPU from which the app can be used.
• Manufacturer
– Manufacturer of the App.
• License Status
– License status of the app.
Information and warning messages are listed under [System Message].
• Additional apps can have a negative impact on real-time behavior.
• Please note that a licence may be required for installation or use.
2. Installing an App
To install an app, proceed as follows:
1. Click at [Install App].
2. In the file explorer that opens, select the app (*.app) to be installed.
3. Click at [Open].
The selected app container is now sent to the controller and installed. After successful installation, the
app is listed in the Installed iCube Apps table.
4
Deployment
To Next Page
Loading...
