45
3.2 Installing the iC9200
3.2.2 Mounting Periphery Modules
When using System SLIO modules, you must always mount the power module 007-1AB00 - DC 24V 10A, because the CPU does not
provide a power section supply due to the system.
(1)
Mounting Power Module 007-1AB00
1. Before mounting the periphery modules, you have to remove the bus cover at the right side
of the CPU by pulling it forward. Keep the cover for later mounting.
2. Mount the periphery modules you want.
(2) Mounting Periphery Modules
The procedure is identical for 8x and 16x periphery modules.
1. Mount the periphery modules you want.
3
Installation and Wiring
To Next Page
Loading...
