44
3.2 Installing the iC9200
(a) Proceeding
1. Mount the mounting rail! Please consider that a clearance from the middle of the mount-
ing rail of at least 105mm above and below exists.
And consider a clearance of at least 10 mm horizontally from the CPU (and SLIO) on
either side.
2. Pull the locking brackets downward, place the CPU at the mounting rail and push the
brackets upward.
If you want to use the CPU without periphery modules, you can wire it now.
(2)
Assembly Possibilities
Horizontal hanging:
To Next Page
Loading...
