124
5.1 Appearance and Parts Description
(6) USB Type-C Connector
This connector is used to connect devices compatible with USB Type-C.
Table 4.4 24pin USB-C jack
Pin No. Signal Contents Pin No. Signal Contents
1 GND Ground 1 GND Ground
2 TX1+ High speed data path 1 + 2 TX2+ High speed data path 2 +
3 TX1- High speed data path 1 - 3 TX2- High speed data path 2 -
4 VBUS Voltage + 5V 4 VBUS Voltage + 5V
5 CC1 Control channel 1 for connector
orientation
5 CC2 Control channel 1 for connector
orientation
6 D+ USB 2.0 data + 6 D+ USB 2.0 data +
7 D- USB 2.0 data - 7 D- USB 2.0 data -
8 n.c. Reserved 8 n.c. Reserved
9 VBUS Voltage + 5V 9 VBUS Voltage + 5V
10 RX2- High speed data path 2 - 10 RX1- High speed data path 1 -
11 RX2+ High speed data path 2 + 11 RX1+ High speed data path 1 +
12 GND Ground 12 GND Ground
The interface is located under the front flap.
To Next Page
Loading...
