51
3.3 Wiring the iC9200
3.3.5
Wiring System SLIO Periphery
When using System SLIO modules, you must always mount the power module 007-1AB00 - DC 24V 10A, because the
CPU does not provide a power section supply due to the system.
(1)
Wiring Power Module
(a) Terminal Module Terminals
With the power module, terminals with spring clamp technology are used for wiring. The spring clamp technol-
ogy allows quick and easy connection of your supply lines. In contrast to screw terminal connections this type of
connection is vibration proof.
(b) Data
U
max
30V DC
I
max
10A
Cross section 0.08 ... 1.5mm
2
(AWG 28 ... 16)
Stripping length 10mm
(c) Wiring Proceeding
1 Pin no. at the connector
2 Opening for screwdriver
3 Connection hole for wire
3
Installation and Wiring
To Next Page
Loading...
