YASKAWA iC9000 Series - Installing the Ic9200; Mounting CPU; Functional Principle

43
3.2 Installing the iC9200
Use a DIN rail to install the iC9200.
Refer to the following section for the installation and operating conditions.
5.1 iC9200 Installation and Operating Conditions on page 130
3.2.1 Mounting CPU
(1) Functional Principle
Move the DIN rail lock in under CPU to the open position. Hook the CPU to the top of the DIN rail and push it
back to fix it to the mounting surface. Move the DIN rail lock to the locked position. The CPU is directly mounted
at a mounting rail. Up to 64 System SLIO modules may be mounted.
The electronic power supply for the modules is connected via the connection to the backplane bus. The power
module 007-1AB00 must always be installed at the right side of the CPU for the power section supply of the
modules.
3.2 Installin
g
the iC9200
There are restrictions on the module configuration of iC9200 modules.
Refer to the following section for details.
2.5
D
evices and Components Tha
t
Can Be Used to
B
uild a System on
p
age 38
3
Installation and Wiring