98
4.8 Web-Based Management - WBM
• [From Port]
– Enter the port for connections that are received via this port.
– You can specify all ports, selected ports, or a range of values.
• [To IP]
– Enter the IP address for connections that are sent to this address.
• [To Port]
– Enter the port for connections that are sent via this port.
– You can specify all ports, selected ports, or a range of values.
• [Comment]
– Here you can comment your filter rule accordingly.
(3) SD Card
The CPU has a slot for a Yaskawa SD card. For future use.
(4) Syslog Configuration
Here you can configure Syslog servers. Syslog respectively Syslog-ng is a standard for transmitting log messages
in
a network.
1. Create Syslog Server Destination
1. To create a Syslog server destination, click at at the bottom of the table.
The dialog for configuring a Syslog server destination opens.
To Next Page
Loading...
