121
5.1 Appearance and Parts Description
(2) Power Connector
Connect the DC power supply to the power connector on the power supply section.
Name Model Color
Power Connector
4-2013522-3
White
(a) Pin Assignments
Pin No. Signal Label Contents
3 DC 24 V 24-VDC input
2 DC 0 V 0-VDC input
1 FG Connects to the frame ground.
(3) EtherCAT port X5
This connector is used to connect EtherCAT communications devices.
This product is equipped with one EtherCAT communications circuit using one port.
Table 4.1 8pin RJ45 jack:
Pin Signal Description
1 TD+ Send data +
2 TD- Send data -
3 RD+ Receive data +
4 n.c. reserved
5 n.c. reserved
6 RD- Receive data -
7 n.c. reserved
8 n.c. reserved
5
Appearance and Parts
To Next Page
Loading...
