33
2.3 Overview
(6)
Electronic Module
The functionality of a periphery module is defined by the electronic module, which is mounted to the terminal
module by a sliding mechanism. With an error the defective electronic module may be exchanged for a functional
module. Here the wiring persists. At the front side there are LEDs for status indication. For easy wiring, you will
find the corresponding connection information for each electronic module on the front and on the side.
(7)
16x Periphery Modules
Each 16x periphery module consists of an electronic unit and a terminal block.
1
2
1 Electronic unit
2 Terminal block
(8)
Electronic Unit
The functionality of a 16x periphery module is defined via the terminal block, which is connected to the elec-
tronic unit via a secure flap mechanism. In the case of an error you can exchange the defective electronic unit for
a functional unit with standing wiring. At the front side there are LEDs for status indication. For easy wiring
each electronic unit shows a corresponding connection diagram at the side. The electronic unit provides the slot
for the terminal block for the wiring and contains the backplane bus with power supply for the electronic and the
connection to the DC 24V power section supply. Additionally, the electronic unit has a locking system for fixing
it at a mounting rail. By means of this locking system your system may be assembled outside of your switchgear
cabinet to be later mounted there as whole system.
2
Overview
To Next Page
Loading...
