84
4.8 Web-Based Management - WBM
(6) SliceBus
Here you will find information on the backplane bus and the connected modules.
• Topology OK
– The topology is correct if the configured and existing modules are identical.
• Data valid
– If the data from the backplane bus were transmitted without errors, these are valid.
• Module List
– The connected modules and the first 2 bytes of the diagnostic data are listed here. You can find more
detailed diagnostic information at [Details].
(7) SliceBus Modules
Here you will find detailed information on the diagnoses of the connected modules. The content is
dynamically
structured and depends on the number of modules on the CPU.
• Module …
– Here you will find detailed information for the corresponding module:
At [General] the general module information is listed such as order number, hardware and firmware version.
At [Diagnostic State] you will find the diagnostic data. For more information on the structure of the diagnos-
tic data, please refer to the corresponding manual of the module.
• [Back]
With [Back] you can jump back to the SliceBus diagnosis.
To Next Page
Loading...
