107
4.8 Web-Based Management - WBM
2. Unzip the zip file.
3. Go back to the WBM to [Firmware Update] and click on [Browse...].
A file selection window is opened.
4. Navigate to the unzipped raucb file and click on [Open].
The firmware file to be installed is loaded and shown in the WBM.
5. Click on [Start Update].
The firmware file is transferred to the CPU and the firmware update is started. The status of the file
transfer and the status of the update process are shown in the WBM as a progress bar.
6. The connection to the CPU is interrupted during the firmware update. After the
start-up of the CPU you have to log on to the WBM of the CPU again. This will
refresh the WBM pages.
7. To check the firmware update, in WBM, go to [Information] - [General Data] page.
4.8.2(1) General Data on page 74
The new firmware version should be shown here. Otherwise start the update again. If the update
does not work, please contact our support.
(3) License Management
1. Tab: [View Containers]
Here you can view and manage the licenses that are installed on the CPU. Several licenses can be combined
in one [container].
In the table all containers with the licenses are listed. The [Refresh] button reloads the list.
4
Deployment
To Next Page
Loading...
